| Author |
Message |
   
Neshane

My Weather
| | Posted on Saturday, October 06, 2007 - 10:35 pm EST : |  
 |
I finally got my elephant ear plants to grow after something ate the first bulbs. So now I was able to cement cast it's leaves. I had several shades of green so I painted one of each color.
Neshane
- Indiana,
Zone "5b"
|
   
Zuzus_petals

My Weather
My Garden
| | Posted on Saturday, October 06, 2007 - 10:59 pm EST : |  
 |
They're splendid, Karen. I keep promising myself I will do that, but . . . Is each one cast with a separate leaf - or can you use the same leaf more than once?
Zuzus_petals
- N. Carolina,
Zone "USDA 8"
|
   
Starzgarden

| | Posted on Sunday, October 07, 2007 - 08:43 am EST : |  
 |
Great job,Karen! I've done this with rhubarb leaves and they look lovely in the garden.
Starzgarden
- Michigan,
Zone "five"
|
   
Neshane

My Weather
| | Posted on Tuesday, October 09, 2007 - 08:01 am EST : |  
 |
Some of the thicker leaves like Hostas you can use twice but most leaves are too thin and can only be used once. I've used Rhubarb,Hosta,Burdock,Elephant Ear and Grape leaves. Most tree leaves didn't come out nice either.
Neshane
- Indiana,
Zone "5b"
|
   
Plantindude

My Garden
| | Posted on Saturday, October 13, 2007 - 10:06 am EST : |  
 |
Neshane,really like like your elephant leave molds. I grow these every year and often thought about doing this with mine. I.ve also seen these at garden show, one was done with castor bean leaves,really cool !! Was really curious though in how you make your molds and still get all the leaf detail. I've heard of several different ways of doing this. thanks for any help. ..........Mike
Plantindude
- Ohio,
Zone "5"
|
   
Neshane

My Weather
| | Posted on Saturday, October 13, 2007 - 07:34 pm EST : |  
 |
I have a sand base, it's wet down so you can make mounds and valleys so your leaf isn't just straight but has curves in it, covered with a plastic bag to keep the sand off. Lay leaf upside down and make a mixture of Portland cement & fine sand to a consistency of brownie batter. Pour onto leaf using a spoon,gently to the edges. Let cure 24hrs for small leaves and 48hrs for bigger ones. Gently remove leaf. Must wait a week to paint and 2-3 weeks to seal. The cement will pick up ALL veins or bad marks on leaf...have fun with them, I do.
Neshane
- Indiana,
Zone "5b"
|
   
Deanneart

Supporting Member
My Favorite Photo
My Weather
My Garden
| | Posted on Saturday, October 13, 2007 - 08:45 pm EST : |  
 |
Wow! marvelous, I've been wanting to try my hand at this for a while. These are beautiful.
Deanne New Hampshire Zone 5 |
   
Plantindude

My Garden
| | Posted on Sunday, October 14, 2007 - 08:53 am EST : |  
 |
Thanks for the info Neshane, will give this method a try,crafty I'm not .hopefully I'll get somegood resuts. ...Mike
Plantindude
- Ohio,
Zone "5"
|
   
Neshane

My Weather
| | Posted on Wednesday, October 31, 2007 - 05:45 pm EST : |  
 |
Here is another site I got some information from. http://faq.gardenweb.com/faq/lists/accout/2002072754010311.html
Neshane
- Indiana,
Zone "5b"
|
   
Growit

My Favorite Photo
My Weather
My Time
| | Posted on Sunday, November 04, 2007 - 05:03 am EST : |  
 |
They are so pretty Karen. I love the different ideas people on this site come up with. If I get a minute I might try my hand at this on my Fatsia. It has enormous leaves.
Growit
- Hampshire,
Zone "8/9"
|
   
Mimi

Supporting Member
My Weather
| | Posted on Sunday, November 04, 2007 - 06:49 am EST : |  
 |
Those look very nice! Like that you did different colors. Really wanted to do that this garden season, never got to it. Caster bean would be fun.
Mimi
- Wisconsin,
Zone "4b"
|
|